 |
HDF5 1.14.6.08405a5
API Reference
|
|
HDF5 1.14.6.08405a5
API Reference
|
Initial document, 18 November 1999.
Updated on 10/24/00, Quincey Koziol
Added the section “Programming Note for C++ Developers Using C Functions,” 08/23/2012, Mark Evans
The HDF5 file format describes how HDF5 data structures and dataset raw data are mapped to a linear format address space and the HDF5 library implements that bidirectional mapping in terms of an API. However, the HDF5 format specifications do not indicate how the format address space is mapped onto storage and HDF (version 5 and earlier) simply mapped the format address space directly onto a single file by convention.
Since early versions of HDF5 it became apparent that users want the ability to map the format address space onto different types of storage (a single file, multiple files, local memory, global memory, network distributed global memory, a network protocol, etc.) with various types of maps. For instance, some users want to be able to handle very large format address spaces on operating systems that support only 2GB files by partitioning the format address space into equal-sized parts each served by a separate file. Other users want the same multi-file storage capability but want to partition the address space according to purpose (raw data in one file, object headers in another, global heap in a third, etc.) in order to improve I/O speeds.
In fact, the number of storage variations is probably larger than the number of methods that the HDF5 team is capable of implementing and supporting. Therefore, a Virtual File Layer API is being implemented which will allow application teams or departments to design and implement their own mapping between the HDF5 format address space and storage, with each mapping being a separate file driver (possibly written in terms of other file drivers). The HDF5 team will provide a small set of useful file drivers which will also serve as examples for those who which to write their own:
H5FD_SEC2
read and write to perform I/O to a single file. All I/O
requests are unbuffered although the driver does optimize file seeking
operations to some extent.
H5FD_STDIO
H5FD_CORE
H5FD_MPIIO
H5FD_FAMILY
h5repart tool can be used to change the sizes of the
family members when stored as files or to convert a family of files to a
single file or vice versa.
H5FD_SPLIT
Most application writers will use a driver defined by the HDF5 library or contributed by another programming team. This chapter describes how existing drivers are used.
Each file driver is defined in its own public header file which should be included by any application which plans to use that driver. The predefined drivers are in header files whose names begin with `H5FD' followed by the driver name and `.h'. The `hdf5.h' header file includes all the predefined driver header files.
Once the appropriate header file is included a symbol of the form
`H5FD_' followed by the upper-case driver name will be the driver
identification number.(1) However, the
value may change if the library is closed (e.g., by calling
H5close) and the symbol is referenced again.
In order to create or open a file one must define the method by which the
storage is accessed(2) and does so by creating a file access property list(3) which is passed to the H5Fcreate or
H5Fopen function. A default file access property list is created by
calling H5Pcreate and then the file driver information is inserted by
calling a driver initialization function such as H5Pset_fapl_family:
hid_t fapl = H5Pcreate(H5P_FILE_ACCESS);
size_t member_size = 100*1024*1024; /*100MB*/
H5Pset_fapl_family(fapl, member_size, H5P_DEFAULT);
hid_t file = H5Fcreate("foo%05d.h5", H5F_ACC_TRUNC, H5P_DEFAULT, fapl);
H5Pclose(fapl);
Each file driver will have its own initialization function
whose name is H5Pset_fapl_ followed by the driver name and which
takes a file access property list as the first argument followed by
additional driver-dependent arguments.
An alternative to using the driver initialization function is to set the
driver directly using the H5Pset_driver function.(4) Its second argument is the file driver identifier, which may
have a different numeric value from run to run depending on the order in which
the file drivers are registered with the library. The third argument
encapsulates the additional arguments of the driver initialization
function. This method only works if the file driver writer has made the
driver-specific property list structure a public datatype, which is
often not the case.
hid_t fapl = H5Pcreate(H5P_FILE_ACCESS);
static H5FD_family_fapl_t fa = {100*1024*1024, H5P_DEFAULT};
H5Pset_driver(fapl, H5FD_FAMILY, &fa);
hid_t file = H5Fcreate("foo.h5", H5F_ACC_TRUNC, H5P_DEFAULT, fapl);
H5Pclose(fapl);
It is also possible to query the file driver information from a file access
property list by calling H5Pget_driver to determine the driver and then
calling a driver-defined query function to obtain the driver information:
hid_t driver = H5Pget_driver(fapl);
if (H5FD_SEC2==driver) {
/*nothing further to get*/
} else if (H5FD_FAMILY==driver) {
hid_t member_fapl;
haddr_t member_size;
H5Pget_fapl_family(fapl, &member_size, &member_fapl);
} else if (....) {
....
}
The H5Dread and H5Dwrite functions transfer data between
application memory and the file. They both take an optional data transfer
property list which has some general driver-independent properties and
optional driver-defined properties. An application will typically perform I/O
in one of three styles via the H5Dread or H5Dwrite function:
Like file access properties in the previous section, data transfer properties can be set using a driver initialization function or a general purpose function. For example, to set the MPI-IO driver to use independent access for I/O operations one would say:
hid_t dxpl = H5Pcreate(H5P_DATA_XFER); H5Pset_dxpl_mpio(dxpl, H5FD_MPIO_INDEPENDENT); H5Dread(dataset, type, mspace, fspace, buffer, dxpl); H5Pclose(dxpl);
The alternative is to initialize a driver defined C struct and pass it
to the H5Pset_driver function:
hid_t dxpl = H5Pcreate(H5P_DATA_XFER);
static H5FD_mpio_dxpl_t dx = {H5FD_MPIO_INDEPENDENT};
H5Pset_driver(dxpl, H5FD_MPIO, &dx);
H5Dread(dataset, type, mspace, fspace, buffer, dxpl);
The transfer property list can be queried in a manner similar to the file access property list: the driver provides a function (or functions) to return various information about the transfer property list:
hid_t driver = H5Pget_driver(dxpl);
if (H5FD_MPIO==driver) {
H5FD_mpio_xfer_t xfer_mode;
H5Pget_dxpl_mpio(dxpl, &xfer_mode);
} else {
....
}
The HDF5 specifications describe two things: the mapping of data onto a linear format address space and the C API which performs the mapping. However, the mapping of the format address space onto storage intentionally falls outside the scope of the HDF5 specs. This is a direct result of the fact that it is not generally possible to store information about how to access storage inside the storage itself. For instance, given only the file name `/arborea/1225/work/f%03d' the HDF5 library is unable to tell whether the name refers to a file on the local file system, a family of files on the local file system, a file on host `arborea' port 1225, a family of files on a remote system, etc.
Two ways which library could figure out where the storage is located are: storage access information can be provided by the user, or the library can try all known file access methods. This implementation uses the former method.
In general, if a file was created with one driver then it isn't possible to open it with another driver. There are of course exceptions: a file created with MPIO could probably be opened with the sec2 driver, any file created by the sec2 driver could be opened as a family of files with one member, etc. In fact, sometimes a file must not only be opened with the same driver but also with the same driver properties. The predefined drivers are written in such a way that specifying the correct driver is sufficient for opening a file.
A driver is simply a collection of functions and data structures which are registered with the HDF5 library at runtime. The functions fall into these categories:
Some drivers need information about file access and data transfers which are very specific to the driver. The information is usually implemented as a pair of pointers to C structs which are allocated and initialized as part of an HDF5 property list and passed down to various driver functions. There are two classes of settings: file access modes that describe how to access the file through the driver, and data transfer modes which are settings that control I/O operations. Each file opened by a particular driver may have a different access mode; each dataset I/O request for a particular file may have a different data transfer mode.
Since each driver has its own particular requirements for various settings, each driver is responsible for defining the mode structures that it needs. Higher layers of the library treat the structures as opaque but must be able to copy and free them. Thus, the driver provides either the size of the structure or a pair of function pointers for each of the mode types.
Example: The family driver needs to know how the format address space is partitioned and the file access property list to use for the family members.
/* Driver-specific file access properties */
typedef struct H5FD_family_fapl_t {
hsize_t memb_size; /*size of each member */
hid_t memb_fapl_id; /*file access property list of each memb*/
} H5FD_family_fapl_t;
/* Driver specific data transfer properties */
typedef struct H5FD_family_dxpl_t {
hid_t memb_dxpl_id; /*data xfer property list of each memb */
} H5FD_family_dxpl_t;
In order to copy or free one of these structures the member file access or data transfer properties must also be copied or freed. This is done by providing a copy and close function for each structure:
Example: The file access property list copy and close functions for the family driver:
static void *
H5FD_family_fapl_copy(const void *_old_fa)
{
const H5FD_family_fapl_t *old_fa = (const H5FD_family_fapl_t*)_old_fa;
H5FD_family_fapl_t *new_fa = malloc(sizeof(H5FD_family_fapl_t));
assert(new_fa);
memcpy(new_fa, old_fa, sizeof(H5FD_family_fapl_t));
new_fa->memb_fapl_id = H5Pcopy(old_fa->memb_fapl_id);
return new_fa;
}
static herr_t
H5FD_family_fapl_free(void *_fa)
{
H5FD_family_fapl_t *fa = (H5FD_family_fapl_t*)_fa;
H5Pclose(fa->memb_fapl_id);
free(fa);
return 0;
}
Generally when a file is created or opened the file access properties
for the driver are copied into the file pointer which is returned and
they may be modified from their original value (for instance, the file
family driver modifies the member size property when opening an existing
family). In order to support the H5Fget_access_plist function the
driver must provide a fapl_get callback which creates a copy of
the driver-specific properties based on a particular file.
Example: The file family driver copies the member size file access property list into the return value:
static void *
H5FD_family_fapl_get(H5FD_t *_file)
{
H5FD_family_t *file = (H5FD_family_t*)_file;
H5FD_family_fapl_t *fa = calloc(1, sizeof(H5FD_family_fapl_t*));
fa->memb_size = file->memb_size;
fa->memb_fapl_id = H5Pcopy(file->memb_fapl_id);
return fa;
}
The higher layers of the library expect files to have a name and allow the
file to be accessed in various modes. The driver must be able to create a new
file, replace an existing file, or open an existing file. Opening or creating
a file should return a handle, a pointer to a specialization of the
H5FD_t struct, which allows read-only or read-write access and which
will be passed to the other driver functions as they are
called.(5)
typedef struct {
/* Public fields */
H5FD_class_t *cls; /*class data defined below*/
/* Private fields -- driver-defined */
} H5FD_t;
Example: The family driver requires handles to the underlying
storage, the size of the members for this particular file (which might be
different than the member size specified in the file access property list if
an existing file family is being opened), the name used to open the file in
case additional members must be created, and the flags to use for creating
those additional members. The eoa member caches the size of the format
address space so the family members don't have to be queried in order to find
it.
/* The description of a file belonging to this driver. */
typedef struct H5FD_family_t {
H5FD_t pub; /*public stuff, must be first */
hid_t memb_fapl_id; /*file access property list for members */
hsize_t memb_size; /*maximum size of each member file */
int nmembs; /*number of family members */
int amembs; /*number of member slots allocated */
H5FD_t **memb; /*dynamic array of member pointers */
haddr_t eoa; /*end of allocated addresses */
char *name; /*name generator printf format */
unsigned flags; /*flags for opening additional members */
} H5FD_family_t;
Example: The sec2 driver needs to keep track of the underlying Unix
file descriptor and also the end of format address space and current Unix file
size. It also keeps track of the current file position and last operation
(read, write, or unknown) in order to optimize calls to lseek. The
device and inode fields are defined on Unix in order to uniquely
identify the file and will be discussed below.
typedef struct H5FD_sec2_t {
H5FD_t pub; /*public stuff, must be first */
int fd; /*the unix file */
haddr_t eoa; /*end of allocated region */
haddr_t eof; /*end of file; current file size*/
haddr_t pos; /*current file I/O position */
int op; /*last operation */
dev_t device; /*file device number */
ino_t inode; /*file i-node number */
} H5FD_sec2_t;
All drivers must define a function for opening/creating a file. This function should have a prototype which is:
The file name name and file access property list fapl are
the same as were specified in the H5Fcreate or H5Fopen
call. The flags are the same as in those calls also except the
flag H5F_ACC_CREATE is also present if the call was to
H5Fcreate and they are documented in the `H5Fpublic.h'
file. The maxaddr argument is the maximum format address that the
driver should be prepared to handle (the minimum address is always
zero).
Example: The sec2 driver opens a Unix file with the requested name and saves information which uniquely identifies the file (the Unix device number and inode).
static H5FD_t *
H5FD_sec2_open(const char *name, unsigned flags, hid_t fapl_id/*unused*/,
haddr_t maxaddr)
{
unsigned o_flags;
int fd;
struct stat sb;
H5FD_sec2_t *file=NULL;
/* Check arguments */
if (!name || !*name) return NULL;
if (0==maxaddr || HADDR_UNDEF==maxaddr) return NULL;
if (ADDR_OVERFLOW(maxaddr)) return NULL;
/* Build the open flags */
o_flags = (H5F_ACC_RDWR & flags) ? O_RDWR : O_RDONLY;
if (H5F_ACC_TRUNC & flags) o_flags |= O_TRUNC;
if (H5F_ACC_CREAT & flags) o_flags |= O_CREAT;
if (H5F_ACC_EXCL & flags) o_flags |= O_EXCL;
/* Open the file */
if ((fd=open(name, o_flags, 0666))<0) return NULL;
if (fstat(fd, &sb)<0) {
close(fd);
return NULL;
}
/* Create the new file struct */
file = calloc(1, sizeof(H5FD_sec2_t));
file->fd = fd;
file->eof = sb.st_size;
file->pos = HADDR_UNDEF;
file->op = OP_UNKNOWN;
file->device = sb.st_dev;
file->inode = sb.st_ino;
return (H5FD_t*)file;
}
Closing a file simply means that all cached data should be flushed to the next lower layer, the file should be closed at the next lower layer, and all file-related data structures should be freed. All information needed by the close function is already present in the file handle.
The file argument is the handle which was returned by the open
function, and the close should free only memory associated with the
driver-specific part of the handle (the public parts will have already been released by HDF5's virtual file layer).
Example: The sec2 driver just closes the underlying Unix file, making sure that the actual file size is the same as that known to the library by writing a zero to the last file position it hasn't been written by some previous operation (which happens in the same code which flushes the file contents and is shown below).
static herr_t
H5FD_sec2_close(H5FD_t *_file)
{
H5FD_sec2_t *file = (H5FD_sec2_t*)_file;
if (H5FD_sec2_flush(_file)<0) return -1;
if (close(file->fd)<0) return -1;
free(file);
return 0;
}
Occasionally an application will attempt to open a single file more than one time in order to obtain multiple handles to the file. HDF5 allows the files to share information(6) but in order to accomplish this HDF5 must be able to tell when two names refer to the same file. It does this by associating a driver-defined key with each file opened by a driver and comparing the key for an open request with the keys for all other files currently open by the same driver.
The driver may provide a function which compares two files f1 and
f2 belonging to the same driver and returns a negative, positive, or
zero value a la the strcmp function.(7) If this
function is not provided then HDF5 assumes that all calls to the open
callback return unique files regardless of the arguments and it is up to the
application to avoid doing this if that assumption is incorrect.
Each time a file is opened the library calls the cmp function to
compare that file with all other files currently open by the same driver and
if one of them matches (at most one can match) then the file which was just
opened is closed and the previously opened file is used instead.
Opening a file twice with incompatible flags will result in failure. For instance, opening a file with the truncate flag is a two step process which first opens the file without truncation so keys can be compared, and if no matching file is found already open then the file is closed and immediately reopened with the truncation flag set (if a matching file is already open then the truncating open will fail).
Example: The sec2 driver uses the Unix device and i-node as the key. They were initialized when the file was opened.
static int
H5FD_sec2_cmp(const H5FD_t *_f1, const H5FD_t *_f2)
{
const H5FD_sec2_t *f1 = (const H5FD_sec2_t*)_f1;
const H5FD_sec2_t *f2 = (const H5FD_sec2_t*)_f2;
if (f1->device < f2->device) return -1;
if (f1->device > f2->device) return 1;
if (f1->inode < f2->inode) return -1;
if (f1->inode > f2->inode) return 1;
return 0;
}
Some drivers may also need to store certain information in the file superblock in order to be able to reliably open the file at a later date. This is done by three functions: one to determine how much space will be necessary to store the information in the superblock, one to encode the information, and one to decode the information. These functions are optional, but if any one is defined then the other two must also be defined.
The sb_size function returns the number of bytes necessary to encode
information needed later if the file is reopened. The sb_encode
function encodes information from the file into buffer buf
allocated by the caller. It also writes an 8-character (plus null
termination) into the name argument, which should be a unique
identification for the driver. The sb_decode function looks at
the name
decodes data from the buffer buf and updates the file argument with the new information, advancing *p in the process.
The part of this which is somewhat tricky is that the file must be readable before the superblock information is decoded. File access modes fall outside the scope of the HDF5 file format, but they are placed inside the boot block for convenience.(8)
Example: To be written later.
HDF5 does not assume that a file is a linear address space of bytes. Instead, the library will call functions to allocate and free portions of the HDF5 format address space, which in turn map onto functions in the file driver to allocate and free portions of file address space. The library tells the file driver how much format address space it wants to allocate and the driver decides what format address to use and how that format address is mapped onto the file address space. Usually the format address is chosen so that the file address can be calculated in constant time for data I/O operations (which are always specified by format addresses).
The HDF5 format allows an optional userblock to appear before the actual HDF5 data in such a way that if the userblock is sucked out of the file and everything remaining is shifted downward in the file address space, then the file is still a valid HDF5 file. The userblock size can be zero or any multiple of two greater than or equal to 512 and the file superblock begins immediately after the userblock.
HDF5 allocates space for the userblock and superblock by calling an allocation function defined below, which must return a chunk of memory at format address zero on the first call.
The library makes many types of allocation requests:
H5FD_MEM_SUPER
H5FD_MEM_BTREE
H5FD_MEM_DRAW
H5FD_MEM_META
H5FD_MEM_GROUP
H5FD_MEM_GHEAP
H5FD_MEM_LHEAP
H5FD_MEM_OHDR
When a chunk of memory is freed the library adds it to a free list and
allocation requests are satisfied from the free list before requesting memory
from the file driver. Each type of allocation request enumerated above has its
own free list, but the file driver can specify that certain object types can
share a free list. It does so by providing an array which maps a request type
to a free list. If any value of the map is H5MF_DEFAULT (zero) then the
object's own free list is used. The special value H5MF_NOLIST indicates
that the library should not attempt to maintain a free list for that
particular object type, instead calling the file driver each time an object of
that type is freed.
Mappings predefined in the `H5FDpublic.h' file are:
H5FD_FLMAP_SINGLE
H5FD_FLMAP_DICHOTOMY
H5FD_FLMAP_DEFAULT
Example: To make a map that manages object headers on one free list
and everything else on another free list one might initialize the map with the
following code: (the use of H5FD_MEM_SUPER is arbitrary)
H5FD_mem_t mt, map[H5FD_MEM_NTYPES];
for (mt=0; mt<H5FD_MEM_NTYPES; mt++) {
map[mt] = (H5FD_MEM_OHDR==mt) ? mt : H5FD_MEM_SUPER;
}
If an allocation request cannot be satisfied from the free list then one of two things happen. If the driver defines an allocation callback then it is used to allocate space; otherwise new memory is allocated from the end of the format address space by incrementing the end-of-address marker.
The file argument is the file from which space is to be allocated,
type is the type of memory being requested (from the list above) without
being mapped according to the freelist map and size is the number of
bytes being requested. The library is allowed to allocate large chunks of
storage and manage them in a layer above the file driver (although the current
library doesn't do that). The allocation function should return a format
address for the first byte allocated. The allocated region extends from that
address for size bytes. If the request cannot be honored then the
undefined address value is returned (HADDR_UNDEF). The first call to
this function for a file which has never had memory allocated must
return a format address of zero or HADDR_UNDEF since this is how the
library allocates space for the userblock and/or superblock.
Example: To be written later.
When the library is finished using a certain region of the format address
space it will return the space to the free list according to the type of
memory being freed and the free list map described above. If the free list has
been disabled for a particular memory usage type (according to the free list
map) and the driver defines a free callback then it will be
invoked. The free callback is also invoked for all entries on the free
list when the file is closed.
The file argument is the file for which space is being freed; type is the type of object being freed (from the list above) without being mapped according to the freelist map; addr is the first format address to free; and size is the size in bytes of the region being freed. The region being freed may refer to just part of the region originally allocated and/or may cross allocation boundaries provided all regions being freed have the same usage type. However, the library will never attempt to free regions which have already been freed or which have never been allocated.
A driver may choose to not define the free function, in which case
format addresses will be leaked. This isn't normally a huge problem since the
library contains a simple free list of its own and freeing parts of the format
address space is not a common occurrence.
Example: To be written later.
Each file driver must have some mechanism for setting and querying the end of address, or EOA, marker. The EOA marker is the first format address after the last format address ever allocated. If the last part of the allocated address range is freed then the driver may optionally decrease the eoa marker.
This function returns the current value of the EOA marker for the specified file.
Example: The sec2 driver just returns the current eoa marker value which is cached in the file structure:
static haddr_t
H5FD_sec2_get_eoa(H5FD_t *_file)
{
H5FD_sec2_t *file = (H5FD_sec2_t*)_file;
return file->eoa;
}
The eoa marker is initially zero when a file is opened and the library may set
it to some other value shortly after the file is opened (after the superblock
is read and the saved eoa marker is determined) or when allocating additional
memory in the absence of an alloc callback (described above).
Example: The sec2 driver simply caches the eoa marker in the file structure and does not extend the underlying Unix file. When the file is flushed or closed then the Unix file size is extended to match the eoa marker.
static herr_t
H5FD_sec2_set_eoa(H5FD_t *_file, haddr_t addr)
{
H5FD_sec2_t *file = (H5FD_sec2_t*)_file;
file->eoa = addr;
return 0;
}
These functions operate on data, transferring a region of the format address space between memory and files.
A driver must specify two functions to transfer data from the library to the file and vice versa.
The read function reads data from file file beginning at address
addr and continuing for size bytes into the buffer buf
supplied by the caller. The write function transfers data in the
opposite direction. Both functions take a data transfer property list
dxpl which indicates the fine points of how the data is to be
transferred and which comes directly from the H5Dread or
H5Dwrite function. Both functions receive type of
data being written, which may allow a driver to tune it's behavior for
different kinds of data.
Both functions should return a negative value if they fail to transfer the requested data, or non-negative if they succeed. The library will never attempt to read from unallocated regions of the format address space.
Example: The sec2 driver just makes system calls. It tries not to
call lseek if the current operation is the same as the previous
operation and the file position is correct. It also fills the output buffer
with zeros when reading between the current EOF and EOA markers and restarts
system calls which were interrupted.
static herr_t
H5FD_sec2_read(H5FD_t *_file, H5FD_mem_t type/*unused*/, hid_t dxpl_id/*unused*/,
haddr_t addr, hsize_t size, void *buf/*out*/)
{
H5FD_sec2_t *file = (H5FD_sec2_t*)_file;
ssize_t nbytes;
assert(file && file->pub.cls);
assert(buf);
/* Check for overflow conditions */
if (REGION_OVERFLOW(addr, size)) return -1;
if (addr+size>file->eoa) return -1;
/* Seek to the correct location */
if ((addr!=file->pos || OP_READ!=file->op) &&
file_seek(file->fd, (file_offset_t)addr, SEEK_SET)<0) {
file->pos = HADDR_UNDEF;
file->op = OP_UNKNOWN;
return -1;
}
/*
* Read data, being careful of interrupted system calls, partial results,
* and the end of the file.
*/
while (size>0) {
do nbytes = read(file->fd, buf, size);
while (-1==nbytes && EINTR==errno);
if (-1==nbytes) {
/* error */
file->pos = HADDR_UNDEF;
file->op = OP_UNKNOWN;
return -1;
}
if (0==nbytes) {
/* end of file but not end of format address space */
memset(buf, 0, size);
size = 0;
}
assert(nbytes>=0);
assert((hsize_t)nbytes<=size);
size -= (hsize_t)nbytes;
addr += (haddr_t)nbytes;
buf = (char*)buf + nbytes;
}
/* Update current position */
file->pos = addr;
file->op = OP_READ;
return 0;
}
Example: The sec2 write callback is similar except it updates
the file EOF marker when extending the file.
Some drivers may desire to cache data in memory in order to make larger I/O
requests to the underlying file and thus improving bandwidth. Such drivers
should register a cache flushing function so that the library can insure that
data has been flushed out of the drivers in response to the application
calling H5Fflush.
Example: The sec2 driver doesn't cache any data but it also doesn't extend the Unix file as aggressively as it should. Therefore, when finalizing a file it should write a zero to the last byte of the allocated region so that when reopening the file later the EOF marker will be at least as large as the EOA marker saved in the superblock (otherwise HDF5 will refuse to open the file, claiming that the data appears to be truncated).
static herr_t
H5FD_sec2_flush(H5FD_t *_file)
{
H5FD_sec2_t *file = (H5FD_sec2_t*)_file;
if (file->eoa>file->eof) {
if (-1==file_seek(file->fd, file->eoa-1, SEEK_SET)) return -1;
if (write(file->fd, "", 1)!=1) return -1;
file->eof = file->eoa;
file->pos = file->eoa;
file->op = OP_WRITE;
}
return 0;
}
The library is capable of performing several generic optimizations on I/O, but these types of optimizations may not be appropriate for a given VFL driver.
Each driver may provide a query function to allow the library to query whether to enable these optimizations. If a driver lacks a query function, the library will disable all types of optimizations which can be queried.
This function is called by the library to query which optimizations to enable for I/O to this driver. These are the flags which are currently defined:
Before a driver can be used the HDF5 library needs to be told of its existence. This is done by registering the driver, which results in a driver identification number. Instead of passing many arguments to the registration function, the driver information is entered into a structure and the address of the structure is passed to the registration function where it is copied. This allows the HDF5 API to be extended while providing backward compatibility at the source level.
The driver described by struct cls is registered with the library and an ID number for the driver is returned.
The H5FD_class_t type is a struct with the following fields:
const char *name
size_t fapl_size
void *(*fapl_copy)(const void *fapl)
fm_size when both are defined.
void (*fapl_free)(void *fapl)
free function to free the
structure.
size_t dxpl_size
void *(*dxpl_copy)(const void *dxpl)
xm_size when both are
defined.
void (*dxpl_free)(void *dxpl)
free function to
free the structure.
H5FD_t *(*open)(const char *name, unsigned flags, hid_t fapl, haddr_t maxaddr)
herr_t (*close)(H5FD_t *file)
int (*cmp)(const H5FD_t *f1, const H5FD_t *f2)
int (*query)(const H5FD_t *f, unsigned long *flags)
haddr_t (*alloc)(H5FD_t *file, H5FD_mem_t type, hsize_t size)
herr_t (*free)(H5FD_t *file, H5FD_mem_t type, haddr_t addr, hsize_t size)
haddr_t (*get_eoa)(H5FD_t *file)
herr_t (*set_eoa)(H5FD_t *file, haddr_t)
haddr_t (*get_eof)(H5FD_t *file)
herr_t (*read)(H5FD_t *file, H5FD_mem_t type, hid_t dxpl, haddr_t addr, hsize_t size, void *buffer)
herr_t (*write)(H5FD_t *file, H5FD_mem_t type, hid_t dxpl, haddr_t addr, hsize_t size, const void *buffer)
herr_t (*flush)(H5FD_t *file)
H5FD_mem_t fl_map[H5FD_MEM_NTYPES]
Example: The sec2 driver would be registered as:
static const H5FD_class_t H5FD_sec2_g = {
"sec2", /*name */
MAXADDR, /*maxaddr */
NULL, /*sb_size */
NULL, /*sb_encode */
NULL, /*sb_decode */
0, /*fapl_size */
NULL, /*fapl_get */
NULL, /*fapl_copy */
NULL, /*fapl_free */
0, /*dxpl_size */
NULL, /*dxpl_copy */
NULL, /*dxpl_free */
H5FD_sec2_open, /*open */
H5FD_sec2_close, /*close */
H5FD_sec2_cmp, /*cmp */
H5FD_sec2_query, /*query */
NULL, /*alloc */
NULL, /*free */
H5FD_sec2_get_eoa, /*get_eoa */
H5FD_sec2_set_eoa, /*set_eoa */
H5FD_sec2_get_eof, /*get_eof */
H5FD_sec2_read, /*read */
H5FD_sec2_write, /*write */
H5FD_sec2_flush, /*flush */
H5FD_FLMAP_SINGLE, /*fl_map */
};
hid_t
H5FD_sec2_init(void)
{
if (!H5FD_SEC2_g) {
H5FD_SEC2_g = H5FDregister(&H5FD_sec2_g);
}
return H5FD_SEC2_g;
}
A driver can be removed from the library by unregistering it
Unregistering a driver makes it unusable for creating new file access or data transfer property lists but doesn't affect any property lists or files that already use that driver.
If a C routine that takes a function pointer as an argument is called from within C++ code, the C routine should be returned from normally.
Examples of this kind of routine include callbacks such as
H5Pset_elink_cb and H5Pset_type_conv_cb
and functions such as H5Tconvert and
H5Ewalk2.
Exiting the routine in its normal fashion allows the HDF5 C Library to clean up its work properly. In other words, if the C++ application jumps out of the routine back to the C++ “catch” statement, the library is not given the opportunity to close any temporary data structures that were set up when the routine was called. The C++ application should save some state as the routine is started so that any problem that occurs might be diagnosed.
This function is intended to be used by driver functions, not applications.
It returns a pointer directly into the file access property list
fapl which is a copy of the driver's file access mode originally
provided to the H5Pset_driver function. If its argument is a data
transfer property list fxpl then it returns a pointer to the
driver-specific data transfer information instead.
The various private H5F_low_* functions will be replaced by public
H5FD* functions so they can be called from drivers.
All private functions H5F_addr_* which operate on addresses will be
renamed as public functions by removing the first underscore so they can be
called by drivers.
The haddr_t address data type will be passed by value throughout the
library. The original intent was that this type would eventually be a union of
file address types for the various drivers and may become quite large, but
that was back when drivers were part of HDF5. It will become an alias for an
unsigned integer type (32 or 64 bits depending on how the library was
configured).
The various H5F*.c driver files will be renamed H5FD*.c and each
will have a corresponding header file. All driver functions except the
initializer and API will be declared static.
This documentation didn't cover optimization functions which would be useful to drivers like MPI-IO. Some drivers may be able to perform data pipeline operations more efficiently than HDF5 and need to be given a chance to override those parts of the pipeline. The pipeline would be designed to call various H5FD optimization functions at various points which return one of three values: the operation is not implemented by the driver, the operation is implemented but failed in a non-recoverable manner, the operation is implemented and succeeded.
Various parts of HDF5 check the only the top-level file driver and do something special if it is the MPI-IO driver. However, we might want to be able to put the MPI-IO driver under other drivers such as the raw part of a split driver or under a debug driver whose sole purpose is to accumulate statistics as it passes all requests through to the MPI-IO driver. Therefore we will probably need a function which takes a format address and or object type and returns the driver which would have been used at the lowest level to process the request.
The driver name is by convention and might not apply to drivers which are not distributed with HDF5.
The access method also indicates how to translate the storage name to a storage server such as a file, network protocol, or memory.
The term "file access property list" is a misnomer since storage isn't required to be a file.
This function is overloaded to operate on data transfer property lists also, as described below.
Read-only access is only appropriate when opening an existing file.
For instance, writing data to one handle will cause the data to be immediately visible on the other handle.
The ordering is arbitrary as long as it's consistent within a particular file driver.
File access modes do not describe data, but rather describe how the HDF5 format address space is mapped to the underlying file(s). Thus, in general the mapping must be known before the file superblock can be read. However, the user usually knows enough about the mapping for the superblock to be readable and once the superblock is read the library can fill in the missing parts of the mapping.
1.9.7