HDF5 Plugins

HDF5 Filter Plugins

Introduction

HDF5 supports compression of data using a stackable pipeline of filters which can be implemented for reading and writing datasets, both at runtime and post‐process. These filters are supported as dynamically loadable plugins, and users can even implement custom filters of their own design.

Programming Model for Applications

This section describes the programming model for an application that uses a third-party HDF5 filter plugin to write or read data. For simplicity of presentation, it is assumed that the HDF5 filter plugin is available on the system in a default location. The HDF5 filter plugin is discussed in detail in the Programming Model for HDF5 Filter Plugins section.

Applying a Third-party Filter When Creating and Writing

a Dataset A third-party filter can be added to the HDF5 filter pipeline by using the H5Pset_filter function, as a user would do in the past. The identification number and the filter parameters should be available to the application. For example, if the application intends to apply the HDF5 bzip2 compression filter that was registered with The HDF Group and has an identification number 307 (Registered Filters) then the application would follow the steps as outlined below:

 dcpl = H5Pcreate
(H5P_DATASET_CREATE); status = H5Pset_filter (dcpl, (H5Z_filter_t)307, H5Z_FLAG_MANDATORY, (size_t)6,
cd_values); dset = H5Dcreate (file, DATASET, H5T_STD_I32LE, space, H5P_DEFAULT, dcpl, status = H5Dwrite
(dset, H5T_NATIVE_INT, H5S_ALL, H5S_ALL, H5P_DEFAULT, wdata[0]); 

Reading Data with an Applied Third-party Filter

An application does not need to do anything special to read the data with a third-party filter applied. For example, if one wants to read data written in the previous example, the following regular steps should be taken:

 file = H5Fopen (FILE, H5F_ACC_RDONLY, H5P_DEFAULT); dset = H5Dopen (file, DATASET,
H5P_DEFAULT); H5Dread (dset, H5T_NATIVE_INT, H5S_ALL, H5S_ALL, H5P_DEFAULT, rdata[0]); 

The command-line utility h5dump, for example, will read and display the data as shown:

HDF5 "h5ex_d_bzip2.h5" {
GROUP "/" {
   DATASET "DS1" {
      DATATYPE  H5T_STD_I32LE
      DATASPACE  SIMPLE { ( 32, 64 ) / ( 32, 64 ) }
      STORAGE_LAYOUT {
         CHUNKED ( 4, 8 )
         SIZE 6410 (1.278:1 COMPRESSION)
      }
      FILTERS {
         USER_DEFINED_FILTER {
            FILTER_ID 307
            COMMENT HDF5 bzip2 filter; see
https://github.com/HDFGroup/hdf5_plugins/blob/master/docs/RegisteredFilterPlugins.md
            PARAMS { 2 }
         }
      }
      FILLVALUE {
         FILL_TIME H5D_FILL_TIME_IFSET
         VALUE  H5D_FILL_VALUE_DEFAULT
      }
      ALLOCATION_TIME {
         H5D_ALLOC_TIME_INCR
      }
      DATA {
         ...
      }
   }
}
}

If the filter can not be loaded then h5dump will show the following:

   ...
}
DATA {h5dump error: unable to print data
}
   ...

A Word of Caution When Using Custom Filters

Data goes through the HDF5 filter pipeline only when it is written to the file or read into application memory space from the file. For example, the I/O operation is triggered with a call to H5Fflush, or when a data item (HDF5 metadata or a raw data chunk) is evicted from the cache or brought into the cache. Please notice that H5Dread/H5Dwrite calls on the chunked datasets do not necessarily trigger I/O since the HDF5 Library uses a separate chunk cache.

A data item may remain in the cache until the HDF5 Library is closed. If the HDF5 plugin that has to be applied to the data item becomes unavailable before the file and all objects in the file are closed, an error will occur. The following example demonstrates the issue. Please notice the position of the H5Zunregister call:

// Create a new group using compression.
gcpl = H5Pcreate (H5P_GROUP_CREATE);
status = H5Pset_filter(gcpl,H5Z_FILTER_BZIP2,H5Z_FLAG_MANDATORY,(size_t)1, cd_values);
group = H5Gcreate (file, GNAME, H5P_DEFAULT, gcpl, H5P_DEFAULT);
for (i=0; i < NGROUPS; i++) {
    sprintf(name, "group_%d", i);
    tmp_id = H5Gcreate (group, name, H5P_DEFAULT, H5P_DEFAULT, H5P_DEFAULT);
    status = H5Gclose(tmp_id);
 }
 
status = H5Pclose (gcpl);
status = H5Gclose (group);
 
// Unregister the filter. Call to H5Fclose will fail because the library tries
// to apply the filter that is not available anymore. This has a cascade effect
// on H5Fclose.
H5Zunregister(H5Z_FILTER_BZIP2);
status = H5Fclose (file);

Here is an error stack produced by the program:

HDF5-DIAG: Error detected in HDF5 (xx.yy.zz) thread 0:
  #000: H5F.c line **** in H5Fclose(): decrementing file ID failed
    major: Object atom
    minor: Unable to close file
  #001: H5I.c line **** in H5I_dec_app_ref(): can't decrement ID ref count
    major: Object atom
    minor: Unable to decrement reference count
  #002: H5F.c line **** in H5F_close(): can't close file
    major: File accessibility
    minor: Unable to close file
 ...
  #026: H5Z.c line **** in H5Z_find(): required filter is not registered
    major: Data filters
    minor: Object not found

To avoid the problem make sure to close all objects to which the filter is applied and flush them using the H5Fflush call before unregistering the filter.

Programming Model for HDF5 Filter Plugins

This section describes how to create an HDF5 filter, an HDF5 filter plugin, and how to install the HDF5 plugin on the system.

Writing a Filter Function

The HDF5 filter function for the dynamically loaded filter feature should be written as any custom filter described in Custom Filters. See the “Example” section, section 5, of that document to get an idea of the simple filter function, and see the example of the more sophisticated HDF5 bzip2 filter function in the “Building an HDF5 bzip2 Plugin Example” section. The HDF5 bzip2 filter function is also available for download from Filter Plugin Repository.

The user has to remember a few things when writing an HDF5 filter function.

• 1. An HDF5 filter is bidirectional. The filter handles both input and output to the file; a flag is passed to the filter to indicate the direction.
• 2. An HDF5 filter operates on a buffer. The filter reads data from a buffer, performs some sort of transformation on the data, places the result in the same or new buffer, and returns the buffer pointer and size to the caller.
• 3. An HDF5 filter should return zero in the case of failure.

The signature of the HDF5 filter function and the accompanying filter structure (see the section below) are described in the HDF5 Reference Manual H5Z_filter_t.

Registering a Filter with The HDF Group

If you are writing a filter that will be used by others, it would be a good idea to request a filter identification number and register it with The HDF Group. Please follow the procedure described at Registered Filters.

The HDF Group anticipates that developers of HDF5 filter plugins will not only register new filters, but will also provide links to the source code and/or binaries for the corresponding HDF5 filter plugins.

It is very important for the users of the filter that developers provide filter information in the “name” field of the filter structure, for example:

const H5Z_class2_t H5Z_BZIP2[1] = {{
  H5Z_CLASS_T_VERS,                    // H5Z_class_t version
  (H5Z_filter_t)H5Z_FILTER_BZIP2,      // Filter id number
  1,                                   // encoder_present flag (set to true)
  1,                                   // decoder_present flag (set to true)
  "HDF5 bzip2 filter; see
  https://github.com/HDFGroup/hdf5_plugins/blob/master/docs/RegisteredFilterPlugins.md",
                                       // Filter name for debugging
  NULL,                                // The "can apply" callback
  NULL,                                // The "set local" callback
  (H5Z_func_t)H5Z_filter_bzip2,        // The actual filter function
}};

The HDF5 Library and command-line tools have access to the “name” field. An application can use the H5Pget_filter<*> functions to retrieve information about the filters.

Using the example of the structure above, the h5dump tool will print the string “HDF5 bzip2 filter found at …” pointing users to the applied filter (see the example in the Reading Data with an Applied Third-party Filter section) thus solving the problem of the filter’s origin.

Creating an HDF5 Filter Plugin

The HDF5 filter plugin source should include:

• 1. The H5PLextern.h header file from the HDF5 distribution.
• 2. The definition of the filter structure (see the example shown in the section above).
• 3. The filter function (for example, H5Z_filter_bzip2).
• 4. The two functions necessary for the HDF5 Library to find the correct type of the plugin library while loading it at runtime and to get information about the filter function:

  H5PL_type_t H5PLget_plugin_type(void);

  const void* H5PLget_plugin_info(void);

  Here is an example of the functions above for the HDF5 bzip2 filter:

  H5PL_type_t H5PLget_plugin_type(void) {return H5PL_TYPE_FILTER;}

  const void* H5PLget_plugin_info(void) {return H5Z_BZIP2;}

• 5. Other functions such as the source of the compression library may also be included.

Build the HDF5 filter plugin as a shared library. The following steps should be taken:

• 1. When compiling, point to the HDF5 header files.
• 2. Use the appropriate linking flags.
• 3. Link with any required external libraries.
• 4. For example, if libbz2.so is installed on a Linux system, the HDF5 bzip2 plugin library libH5Zbzip2.so may be linked with libbz2.so instead of including bzip2 source into the plugin library. The complete example of the HDF5 bzip2 plugin library is provided at BZIP2 Filter Plugin and can be adopted for other plugins.

Installing an HDF5 Filter Plugin

The default directory for an HDF5 filter plugin library is defined on UNIX-like systems as

“/usr/local/hdf5/lib/plugin”

and on Windows systems as

"%ALLUSERSPROFILE%/hdf5/lib/plugin".

The default path can be overwritten by a user with the HDF5_PLUGIN_PATH environment variable. Several directories can be specified for the search path using “:” as a path separator for UNIX-like systems and “;” for Windows.

Readers are encouraged to try the example in the “Building an HDF5 bzip2 Plugin Example” section.

Design

Dynamic loading of the HDF5 filter plugin (or filter library) is triggered only by two events: when an application calls the H5Pset_filter function to set the filter for the first time, or when the data to which the filter is applied is read for the first time.

Building an HDF5 bzip2 Plugin Example

The HDF Group provides an repository of the HDF5 filter plugin that can be checked out from BZIP2 Filter Plugin.

It contains the source code for the bzip2 plugin library and an example that uses the plugin. It requires the HDF5 Library with the dynamically loaded feature and the bzip2 library being available on the system. The plugin and the example can be built using configure or CMake commands. For instructions on how to build with CMake, see the README.txt file in the source code distribution. The bzip2 library that can be built with CMake is available from:

GIT_URL: "https://github.com/libarchive/bzip2.git"
GIT_BRANCH: "master"

See the documentation at hdf5_plugins/docs folder. In particular: INSTALL_With_CMake USING_HDF5_AND_CMake